|See more of Mel's Tech Tips Here|
|How to measure your seat post|
|Remove your seat post
from the frame then take a rag and clean off all dirt and crud so you
can read the numbers. Check size using caliper tool. If you don't have a
caliper tool, you can always use a "poor man's" caliper by taking an
adjustable wrench and use it like a vernier caliper. Once the wrench is
open to the correct size, measure the opening with a metric ruler.|
When you are ready to reinsert seat post make sure you grease the post and the seat tube. This does not apply to carbon.
After you ride in the rain, make sure you pull both your seat posts out and check for water down the seat tube. Turn the bike upside down and watch for any water coming out, if you see any, dry out your seat tube so it does not damage any other parts.
|Remove and clean seat post.||Check size with
|Using an adjustable wrench ("Poor
to measure seat post.
Terry Liberator Gel|
Men's or Women's
Very Limited Quantity
Available in 25.4, 27.2 or 31.6
Thudbuster Rebuild Kit
with Tool $46
no Tool $36
Aluminum Replaceable Seat Post Clamps|
Size 31.8mm with 5mm allen key. Great replacement for Cannondale, Co-Motion, Hokitika & some Burleys etc.
Inline Rack Bosses|
on seat binder, 3 sizes
31.8mm Co-Motion Clamp
32.6mm Calfee Clamp
34.9mm Land Shark Clamp
(Great on Calfee or Land Shark)
Our own design!
for those who truly appreciate the fine craftsmanship of real leather.
TANDEMS EAST | firstname.lastname@example.org | 856-451-5104 | 86 Gwynwood Drive Pittsgrove, NJ 08318
design and maintenance by WindowsWiz Computer Services|
Logos and other trademarks are property of their respective owners. All other images are property of Tandems East and may not be reproduced without prior written permission. All prices are subject to change without notice. Tandems East is not responsible for typographical errors.
© Copyright Tandems East all rights reserved 1996 -